Citrix 1Y0-231 Dumps Updated May 04, 2023 WIith 72 Questions
View All 1Y0-231 Actual Free Exam Questions May 04, 2023 Updated
NEW QUESTION # 34
Which three Citrix Gateway elements can be configured by the Citrix Gateway Wizard? (Choose three.)
- A. The rewrite policy for HTTP to HTTPS redirect
- B. The bind SSL server certificate for the Citrix Gateway virtual server
- C. The Citrix Gateway primary virtual server
- D. The primary and optional secondary authentications
- E. The responder policy for HTTP to HTTPS redirect
Answer: B,C,D
NEW QUESTION # 35
A Citrix Administrator configured a load-balancing virtual server to utilize the least bandwidth load-balancing method. A service attached to this virtual server is brought into the effective state during production hours.
During the startup of a virtual server, which load-balancing method is used by default?
- A. Round-robin
- B. Least bandwidth
- C. Custom load
- D. Least connections
Answer: D
NEW QUESTION # 36
A Citrix Administrator needs to configure a Citrix Gateway virtual server to meet an organization's security requirements.
Which two types of devices can the administrator control with Endpoint Analysis (EPA) scans? (Choose two.)
- A. Mac
- B. Microsoft Windows
- C. Chromebook
- D. Android
- E. iOS
Answer: A,B
NEW QUESTION # 37
Scenario: A Citrix Administrator is configuring a new authentication, authorization, and auditing (AAA) virtual server, and the status is DOWN. The administrator makes the below configurations:
add lb vserver lb_vsrv_www HTTP 10.107.149.229 80 -persistenceType NONE -cltTimeout 180 -authn401 ON
-authnVsName SAML_SP
bind lb vserver lb_vsrv_www_ssl Red_srv
bind lb vserver Ib_vsrv_www_ssl Blue_srv
add authentication vserver SAML_SP SSL 10.107.149.230 443 -AuthenticationDomain citrix.lab What should the administrator bind to the virtual server SAML_SP to complete the installation and change the status to UP?
- A. A service
- B. An LDAP policy
- C. An SSL certificate
- D. An AAA policy
Answer: B
NEW QUESTION # 38
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least bandwidth
- B. Least packets
- C. Least connection
- D. Least response time
Answer: A
Explanation:
Explanation/Reference: https://kb.wisc.edu/ns/page.php?id=13201#Least%20Bandwidth%20Method
NEW QUESTION # 39
While applying a new Citrix ADC device, a Citrix Administrator notices an issue with the time on the appliance.
Which two steps can the administrator perform to automatically adjust the time? (Choose two.)
- A. Enable NTP synchronization.
- B. Add an SNMP trap.
- C. Add an NTP server.
- D. Configure an NTP monitor.
- E. Add an SNMP manager.
Answer: A,C
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/system/basic-operations.html#how-to-synchronize-system-clock-with-servers-on-the-network
NEW QUESTION # 40
Which Citrix ADC service monitor can a Citrix Administrator use to test the three-way handshake between the Citrix ADC and the backend server?
- A. TCP
- B. PING
- C. UDP
- D. LDAP
Answer: A
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-builtin- monitors/monitor-tcp.html
NEW QUESTION # 41
A Citrix Administrator needs to integrate an existing certification-based authentication policy into an existing Citrix Gateway virtual server.
Which three steps can the administrator take to accomplish this? (Choose three.)
- A. Enable client authentication on the SSL parameters of the virtual server.
- B. Change the client certificate to mandatory on the SSL parameters of the virtual server.
- C. Bind the existing CERT authentication policy to the Citrix Gateway virtual server.
- D. Enable the two-factor option on the existing CERT authentication profile.
- E. Create a CERT authentication policy and bind it to the Citrix Gateway virtual server.
Answer: A,B,E
NEW QUESTION # 42
A Citrix Administrator needs to provide access to Microsoft SharePoint through Citrix Gateway for users connecting from a web browser using the Citrix Gateway plug-in.
How can the administrator configure this?
- A. Configure Citrix Gateway in ICA proxy mode.
- B. Set clientless access to OFF.
- C. Enable SSL bridge mode.
- D. Set clientless access to ON.
Answer: A
NEW QUESTION # 43
If a user device does NOT comply with a company's security requirements, which type of policy can a Citrix Administrator apply to a Citrix Gateway virtual server to limit access to Citrix Virtual Apps and Desktops resources?
- A. Session
- B. Authorization
- C. Traffic
- D. Responder
Answer: A
NEW QUESTION # 44
Which authentication type can a Citrix Administrator use to enable Citrix ADC authentication, authorization, and auditing (AAA) dual-factor authentication from a user's mobile device app?
- A. LOCAL
- B. SAML
- C. RADIUS
- D. LDAP
Answer: D
NEW QUESTION # 45
Scenario: While attempting to access a web server that is load-balanced by a Citrix ADC using HTTPS, a user receives the message below:
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from getting this message?
- A. Ensure that the server certificate is linked to its respective intermediate and root certificates.
- B. Ensure that users have the certificate's public key.
- C. Ensure that users have the certificate's private key.
- D. Ensure that users have the server certificate installed.
Answer: A
NEW QUESTION # 46
A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the Citrix ADC?
- A. Forward proxy
- B. Two-arm
- C. Transparent
- D. One-arm
Answer: B
NEW QUESTION # 47
Which Citrix ADC service monitor can a Citrix Administrator use to test the three-way handshake between the Citrix ADC and the backend server?
- A. TCP
- B. PING
- C. UDP
- D. LDAP
Answer: A
NEW QUESTION # 48
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages.
To what are these messages related?
- A. High availability nodes
- B. VLAN
- C. Load-balancing virtual servers
- D. SSL certificate
Answer: C
NEW QUESTION # 49
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Add two more 10G Citrix ADC ports to the network and configure VLAN.
- B. Purchase another Citrix ADC MPX appliance.
- C. Plug another 10G Citrix ADC port into the router.
- D. Add another 10G Citrix ADC port to the switch, and configure link aggregation control protocol (LACP).
Answer: D
NEW QUESTION # 50
A Citrix Administrator needs to block all local printer access from users in the Marketing department who are connecting remotely, but who should still have access when connecting inside the corporate network using the same Citrix Gateway.
What can the administrator configure to accomplish this?
- A. Extended access control list (ACL)
- B. SmartControl
- C. AppFlow
- D. Simple access control list (ACL)
Answer: B
Explanation:
Reference:
html
NEW QUESTION # 51
Scenario: A Citrix Administrator configured the policies below:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTP.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID" ACT_2 Which set of commands can the administrator use to bind the rewrite policies to the LB vserver lb_vsrv so that POL_2 is evaluated after POL_1 is evaluated successfully?
- A. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- B. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
- C. bind lb vserver lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
- D. bind lb vserver lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vserver lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
Answer: D
NEW QUESTION # 52
......
The Citrix 1Y0-231 exam is designed for IT professionals who want to demonstrate their ability to deploy and manage Citrix ADC 13 with Citrix Gateway. This certification is intended for individuals who have experience with Citrix ADC and want to further their knowledge and skills in the field. The exam covers a variety of topics related to Citrix ADC and Citrix Gateway, including installation, configuration, management, and troubleshooting.
New 1Y0-231 Exam Questions Real Citrix Dumps: https://endexam.2pass4sure.com/CCA-N/1Y0-231-actual-exam-braindumps.html