The QSDA2022 PDF Dumps Greatest for the Qlik Exam Study Guide!
Read Online QSDA2022 Test Practice Test Questions Exam Dumps
Qlik QSDA2022 exam is a proctored exam that is available online. It consists of 50 multiple-choice questions and you have 120 minutes to complete the exam. The passing score for the exam is 70%, and you will receive your results immediately after completing the exam.
Qlik QSDA2022 (Qlik Sense Data Architect Certification Exam - 2022) is a certification exam that tests the knowledge and skills of individuals in the field of data architecture. QSDA2022 exam is designed to ensure that individuals have a thorough understanding of Qlik Sense data architecture and can effectively design, build and maintain data models and data integration solutions. Passing the exam validates the individual's expertise in data architecture, making them a valuable asset to any organization.
NEW QUESTION # 23 
A company has different departments.
Executive and Sales should always be the first values in a Department filter pane.
Which script must the data architect use to meet this requirement?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 24 
Refer to the exhibit
A data architect develops an app for Coffee4all, a coffee company with stores located throughout Europe The script runs successfully, but the Stores table does not have any values.
What should the data architect do?
- A. Use where exists (ID)
- B. Use where exists (ID, StorelD)
- C. Use Concatenate before loading the Stores table
Answer: A
NEW QUESTION # 25 
A Human Resources Director needs an app to analyze organizational structure. The Directory is particularly interested in the longest levels of line management.
Two table loads are required. Both use the same basic structure.
Which two table load prefixes are needed?
- A. * HierarchyBelongsTo(ManagerlD, Manager, ManagerlD, ManagerlD, Manager Level)
* Hierarchy(EmployeelD, ManagerlD, Name. Manager Name, Structure '/' Depth) - B. * HierarchyBelongs.To(EmployeeID, ManagerlD, Name ManagerlD, Manager, Depth)
- C. *HierarchyLevel(EmployeelD, ManagerlD Name Level, '/', Structure)
*HierarchyBelongsTo(EmployeelD, ManagerlD, Name ManagerlD,Manager, Depth) - D. * Hierarchy(EmployeelD. ManagerlD Name, Manager Name, Structure V,Depth)
* HierarchyLevelEmployeelD, ManagerlD, Name, Manager, Name, Structure, Depth '/')
Answer: B
NEW QUESTION # 26 
The Section Access security table for an app is shown. User ABC\PPP opens a Qlik Sense app with a table using the field called LEVEL on one of the table columns.
What is the result?
- A. The table is displayed without the LEVELcolumn.
- B. The user gets an "incomplete visualization" error
- C. The user gets a "Field not found" error.
- D. The table is removed from the user interface.
Answer: B
NEW QUESTION # 27
Refer to the exhibit.
A business department is forecasting revenue within an Excel spreadsheet.
A data architect needs to include this forecast into the existing data model, and without losing any data.
Which two sets of steps will meet these requirements? (Select two.)
- A. 1 Load the Excel spreadsheet using the data load editor
2. Change the sort order by date
3. Create a composite key out of the forecast and region 4 Connect to the existing data model - B. 1 Load the Excel spreadsheet into the data manager
2. Use the Unpivot function
3. Create a composite key from the date and region
4. Connect the new table to the data model
1 Load the Excel spreadsheet using the data manager
2 Rename the ForecastDate field to Date 3. Disable the Region
4 Connect to the existing data model - C. 1. Load the Excel spreadsheet using the data load editor
2 Use the Crosstable function to unpivot the table
3 Create a composite key out of the date and region
4 Connect the new table to the data model - D. 1. Load the Excel spreadsheet using the data load editor
2. Use the Unpivot function
3 Use the Sum function to group the forecast by date
4 Connect to the existing data model
Answer: B,C
Explanation:
Explanation
Option B involves loading the Excel spreadsheet using the data load editor and then using the Crosstable function to unpivot the table, creating a composite key out of the date and region, and connecting the new table to the existing data model. Option D involves loading the Excel spreadsheet using the data manager, using the Unpivot function, creating a composite key from the date and region, and connecting the new table to the existing data model.
NEW QUESTION # 28
Refer to the exhibit.
Refer to the exhibits.
While using an app, the users report that some Sales Reps do NOT have personal details, like Division or Address Number A data architect has been called in to investigate.
The data architect uses the data model viewer to determine the relationship between the SalesRepMaster and CustomerMaster tables.
What is the cause of the issue?
- A. 26 values for Sales Rep are null in CustomerMaster
- B. 40.7% of the Sales Rep have CustomerMaster information
- C. Density is 100% while Total Distinct and Present Distinct are NOT the same
- D. 59.3% of the Sales Rep have CustomerMaster information
Answer: C
Explanation:
Explanation
When using the data model viewer to investigate the relationship between the SalesRepMaster and CustomerMaster tables, the data architect would look at the density of the relationship. Density is a measure of how well the key fields of a table match the key fields of another table. A density of 100% means that all key fields in one table have a match in the other table.
When the density is 100% but the total distinct and present distinct values for the key fields of the related tables do not match, it means that some of the key fields in one table do not have a match in the other table, this is the cause of the issue.
NEW QUESTION # 29 
Refer to the exhibits.
The first table, Mastersports, contains the master list of all sport names that need to be loaded into the app. The second table, TeamMembers, containsthe teams and team members registered for specific sports.
In a Qlik Sense app, a data architect is loading the two tables that need to be linked together based on the Sport field. The table format cannot be changed in the source.
What should the dataarchitect do in the data load editor?
- A. Apply a preceding LOAD to the MasterSports table with the SUBFIELD function to create the Sport field
- B. Apply a FOR loop to load to the MasterSports table creating the values for the Sport field
- C. Apply a preceding LOAD from the TeamMembers table with the SUBFIELD function and rename the field to Sport
Answer: B
NEW QUESTION # 30
A data architect needs to arrange data to create an app with a map where multiple location points consolidate into hexagonal areas based on postal codes The areas will be color coded based on the number of vendors in thelocation.
Which GeoAnalytics operation should the data architect use?
- A. Binning
- B. AddressLookup
- C. Intersect
- D. Simplify
Answer: A
Explanation:
Explanation
Binning is a GeoAnalytics operation that can be used to arrange data into hexagonal areas based on postal codes. The areascan then be color coded based on the number of vendors in the location.Source: Qlik Binning is a GeoAnalytics operation that allows data points to be grouped into hexagonal areas based on a geographic field, such as postal codes. The data architect can use binning to group the location points by postal code and then color code the resulting hexagonal areas based on the number of vendors in each location.
This operation is useful for visualizing spatial data and identifying patterns or trends in the data.
NEW QUESTION # 31
A data architect needs to upload data from ten different sources, but only if there are any changes after the last reload When data is updated, a new file is placed into a folder mapped to E A439926003 The data connection points to this folder.
The data architect plans a script which will:
1. Verify that the file exists
2. If the file exists, upload it Otherwise, skip to the next piece of code The script will repeat this subroutine for each source. When the script ends, all uploaded files will be removed with a batch procedure.
Which option should the data architectuse to meet these requirements?
- A. FileExists, FOR EACH, IF
- B. FilePath, FOR EACH, Peek, Drop
- C. FilePath, IF, THEN. Drop
- D. FileSize, IF, THEN, END IF
Answer: D
NEW QUESTION # 32
Refer to the exhibit.
What are the values of the variables vLoadStart and vLoadComplete after the script executes?
- A. vLoadStart: current system date and time when the script started vLoadComplete: 'now()'
- B. vLoadStart: system date when the app was opened vLoadComplete: current system date and time when the script ended
- C. vLoadStart; 'NOW{)'
vLoadComplete: current system date and time when the script ended - D. vLoadStart: system date when the app was opened vLoadComplete 'now()'
Answer: A
Explanation:
Explanation
vLoadStart variable is assigned the current system date and time when the script starts, and vLoadComplete variable is assigned the current system date and time when the script ends.
NEW QUESTION # 33
Refer to the exhibits.
Some business users created an app by using the Add data functionality and loading two Excel files Orders and Customers.
The app is used to analyze the number of orders by customer. When the users create a bar chart to review the figures, the data shown is incorrect.
What should the data architect do to resolve this issue?
- A. Open the data load editor and use JOIN instead of concatenate to combine Orders and Customers by CustomerlD
- B. Open the data load editor and apply a NOCONCATENATE function in the LOAD statement on the Orders table
- C. Open the data manager, split the Customers table, and JOIN Orders and Customers on the CustomerlD field
- D. Open the data manager, split the Customers table, and associate both tables on CustomerlD field
Answer: A
NEW QUESTION # 34
A data architect completes development of a new app with two data sources Both data sources will also be used by other apps in the future The sources have different data refresh frequencies
* Source 1 Contains frequently updated data and must be refreshed hourly
* Source 2 Contains data that is transferred from a partner and must be refreshed weekly Tasks must be created to load the data sources and make sure that the new app uses the most current data The data will be stored in two QVDs Which tasks should be created to meet these requirements'?
- A. 1 Schedule Task 1 to run hourly and refresh data from Source 1
2 Schedule Task 2 to run weekly and refresh data from Source 2
3. Schedule a task for the app that is dependent on completion of Task 2 that loads the two QVDs - B. 1. Schedule Task 1 to run hourly and refresh data from Source 1
2 Schedule Task 2 that is dependent on Task 1 to refresh data from Source 2
3. Schedule a task for the app that is dependent on completion of Task 2 that loads the two QVDs - C. 1. Schedule Task 1 to run hourly and refresh data from Source 1
2 Schedule Task 2 that is dependent on Task 1 to refresh data from Source 2
3 Schedule a task for the app that is dependent on completion of Tasks 1 and 2 that loads the two QVDs - D. 1 Schedule Task 1 to run hourly and refresh data from Source 1
2 Schedule Task 2 to run weekly and refresh data from Source 2
3. Schedule a task for the app that is dependent on completion of Tasks 1 or 2 that loads the two QVDs
Answer: C
Explanation:
Explanation
This option ensures that the data in the two data sources is always up-to-date by scheduling the data refresh tasks to run at the appropriate frequencies. Task 1 runs hourly to refresh data from Source 1, and Task 2 is dependent on Task 1 so that it runs only after Task 1 is completed. This ensures that the data from Source 2 is loaded only after the most current data from Source 1 is loaded.
NEW QUESTION # 35 
On executing a load script of an app, the country field needs to be normalized. The developer uses a mapping table to address the issue.
What should the data architect do?
- A. Use a LEFT JOIN instead of the APPLYMAP
- B. Use LOAD DISTINCT on the mapping table
- C. Review the values of the source mapping table
- D. Create two different mapping tables
Answer: C
NEW QUESTION # 36
A company has a stream with multiple apps One of the apps is a multi-regional sales app.
A data architect must set up security for users to access the stream, enter the app, and view specific sheets and data.
Whichfeatures should the data architect use to meet these requirements?
- A. QMC security rules and section access
- B. QMC security rules and custom properties
- C. Section access and sheet properties
- D. Section access and set analysis
Answer: A
NEW QUESTION # 37 
A data architect is creating an app using three tables. After executing thescript, a warning displays Which two steps should the data architect do to resolve this warning? (Select two.)
- A. insert "Join (ProductDetails)" in front of the Load statement in line 24 to combineProductPriceList with ProductDetails
- B. Remove the rename statement (line 24) in the ProductPriceList table leaving the Product field name as is.
- C. Move the preceding Load statement in line 10 between table name (line 23) and Load statement (line
24). - D. Rename the Category field in theProductPriceLis table to PnceCategory (line 24).
Answer: D
NEW QUESTION # 38
Refer to the exhibit.
The data architect needs to build a model that contains Sales and Budget data for each customer.
Some customers have Sales without a Budget, and other customers have a Budget with no Sales During loading, the data architect resolves a synthetic key by creating the composite key For validation, the data architect creates a table containing Customer, Month. Sales, and Budget columns.
What does the data architect see when selecting a month?
- A. All Customers, all Budget and all Sales records
- B. Customer and Sales records for that month, but missing values for Budget
- C. Customer, Sales, and Budget records for that month
- D. Customer and Budget records for that month, but missing values for Sales
Answer: C
NEW QUESTION # 39
Refer to the exhibit.
A data architect is loading two tables into a data model from a SQL database These tables are related on key fields CustomerlD and CustomerKey.
Which script is valid to load the tables and maintain the correct association?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 40
Refer to the exhibit.
A data architect executes the script.
What will be the value of the first row for Field_1?
- A. Null
- B. A
- C. D
- D. 0
Answer: C
NEW QUESTION # 41
......
Qlik QSDA2022 exam is an excellent way for professionals to demonstrate their expertise in data architecture using Qlik Sense. Passing QSDA2022 exam validates that a candidate has the necessary skills to design and implement scalable and efficient data architectures using Qlik Sense. With the increasing demand for data-driven decision-making, this certification can help professionals stand out in the job market and advance their careers.
QSDA2022 Certification All-in-One Exam Guide Jul-2023: https://endexam.2pass4sure.com/Qlik-Sense-Data-Architect/QSDA2022-actual-exam-braindumps.html