SAP Certified Technology Specialist E-S4HCON2022 Dumps Full Questions with Free PDF Questions to Pass
100% Updated SAP E-S4HCON2022 Enterprise PDF Dumps
NEW QUESTION 20
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM continues with the next phase and your modifications are kept as In the start release
- B. Before continuing with the next phase SUM asks for a modification adjustment transport
- C. SUM continues with the next phase and your modifications are lost
- D. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
Answer: A
NEW QUESTION 21
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Execution of eCATTs for business validation tests
- B. Execution of SPDD modification adjustment
- C. Creation of the table structures in the new SAP HANA database
- D. Execution of XPRAs and AIMs
- E. Execution of SPAU modification adjustment
Answer: A,D,E
NEW QUESTION 22
You are planning to use DMO of SUM to perform an "inplace-migration" to SAP HANA.
What do you need to consider? Note: there are 2 correct answers to this question.
- A. SAP HANA Landscape Reorganization required a manual step to edit a file.
- B. Network capacity between exporting and importing R3load processes must be.
- C. The target database size increases temporarily because of the Shadow Repository.
- D. The source system is non-Unicode and the target database is a scale-out system.
- E. Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.
Answer: A,E
NEW QUESTION 23
You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.
- A. Configure it within transaction ATC
- B. Apply the corresponding SAP note via SAP Note Assistant
- C. Download it from SAP Support Portal
- D. Generate it by analyzing the specific custom code via RFC
Answer: C
NEW QUESTION 24
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:
- A. By searching for transport requests that are assigned to the project SAP_ADJUST
- B. By searching for transport requests named <SID>K0<number>
- C. By searching for transport requests in the file umodauto.Ist
- D. By searching for transport requests in DIR_TRANS, subdirectory "transport"
Answer: C
NEW QUESTION 25
During a SUM run you want to check if the phase SHADOW_IMPORT_INC is still running properly. Where can you find information about this?
There are 2 correct answers to this question.
Response:
- A. Check for the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- B. Check for running R3trans processes on the host of the primary application server
- C. Check for running batch jobs in the shadow system via Job Overview (SM37)
- D. Check for running R31oad processes on the host of the primary application server
Answer: A,B
NEW QUESTION 26
You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.
- A. Credentials of a named user in the development client of the development system
- B. Credentials of user DDIC in client 000 of the shadow system
- C. Credentials of user DDIC in the development client of the development system
- D. Credentials of a named user in client 000 of the shadow system
Answer: A
NEW QUESTION 27
Which additional configuration options are offered by SUM when selecting "Switch expert mode on" in main configuration option "Standard"?
There are 2 correct answers to this question.
Response:
- A. Choose the instance number of the shadow instance.
- B. Keep archiving on during the whole procedure.
- C. Use the Near Zero Downtime Maintenance Technology (NZDM).
- D. Reuse a profile for the shadow instance from a previous run.
Answer: A,D
NEW QUESTION 28
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:
- A. It performs a comparison on all tables using row counts.
- B. It performs a comparison of all tables using check sum.
- C. It does NOT perform any table comparison.
- D. It performs a comparison on selected tables using check sum.
Answer: A
NEW QUESTION 29
You are executing a standard SUM procedure to update an SAP system using main configuration mode "Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. Before the downtime starts
- B. Early in the downtime
- C. As part of the cleanup process
- D. At the end of the downtime
Answer: A
NEW QUESTION 30
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of user DDIC in client 000 of the shadow system
- B. Credentials of a named user in the development client of the development system
- C. Credentials of user DDIC in the development client of the development system
- D. Credentials of a named user in client 000 of the shadow system
Answer: D
NEW QUESTION 31
What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:
- A. To repeat specific phases during the SUM run
- B. To auto-fill specific fields on selected screens on the SUM UI
- C. To skip selected phases during the SUM run
- D. To make the progress information within SUM UI more accurate
Answer: D
NEW QUESTION 32
You have chosen the "Advanced" option during the main configuration of the SUM tool. Which steps take place via the shadow instance?
There are 2 correct answers to this question.
Response:
- A. Activation of dictionary objects (ACT_UPG)
- B. Modification adjustment (SPDD)
- C. Conversion of application tables (PARCONVJJPG)
- D. Switch to new repository (EU_SWITCH)
Answer: A,B
NEW QUESTION 33
Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?
- A. AA
- B. The link to different patch levels to SUM
- C. An overview about possible upgrade paths
- D. The corrections to the SUM Guide
Answer: B,C,D
NEW QUESTION 34
You are upgrading a three-system landscape DEV - QAS - PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system. What do you need to consider? Please choose the correct answer.
- A. The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.
- B. The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.
- C. The upgrade of the PRD must be finished before you start new development in the DEV.
- D. The transport between Unicode and non-Unicode systems is forbidden.
Answer: B
NEW QUESTION 35
Which are valid options to check the progress of the database migration in a Microsoft Windows environment?
There is correct answers to this question.
Response:
- A. Check the log files written under "SUM\abap\log"
- B. Check the dump size of the database export on disk
- C. Check logs for jobs starting with "RSUPG_SGEN" in the system
- D. Check the "Charts Control Center" in the SUM UI
Answer: A,D
NEW QUESTION 36
You want to perform an SAP S/4HANA conversion using SUM with DMO. Which steps run before the beginning of the technical downtime, independent of your SUM configuration?
There are 3 correct answers to this question.
Response:
- A. Import of upgrade and language data from the download directory in phase TABIM UPG
- B. Generation of the new ABAP loads in phase RUN_SGEN_GENER8
- C. Activation of dictionary objects in phase ACT_UPG
- D. Import of dictionary objects from the download directory in phase DDIC_UPG
- E. Creation of application tables in the SAP HANA database in phase EU_CLONE_MIG_DT_CREATE
Answer: A,C,D
NEW QUESTION 37
What do you need to know about the SAP ERP Upgrade and Update Guide?
There are 2 correct answers to this question.
Response:
- A. It contains a troubleshooting section
- B. It is target release specific
- C. It contains a section "free space requirements"
- D. It is a database-specific document
Answer: B,C
NEW QUESTION 38
What are the benefits of using the Benchmarking option of the DMO for SUM?
There are 2 correct answers to this question.
Response:
- A. You can find the optimal number of parallel R31oad processes by monitoring host performance.
- B. You can obtain migration duration files that can be used to optimize the next runs from a previous benchmark run.
- C. You can record the modification adjustment during migration and use the transports in the next runs.
- D. You can verify that the content of the download directory matches the stack.XML file.
Answer: A,C
NEW QUESTION 39
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step "Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:
- A. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
- B. The SAP Support Packages that will be bound to the upgrade
- C. The SAP Support Packages contained in the upgrade media
- D. The SAP Support Packages found in the download directory
Answer: D
NEW QUESTION 40
You want to execute a Unicode Conversion only. Which approach do you need to follow?
Please choose the correct answer.
Response:
- A. SWPM using the Load procedure
- B. SWPM using the Backup / Restore procedure
- C. SUM with DMO
- D. SUM without DMO
Answer: A
NEW QUESTION 41
What do you do to prepare the database migration option of a SUM procedure?
There are 3 correct answers
Response:
- A. Move the SAPM update archive into the download folder
- B. Extract the SAP HANA database installation archive
- C. Extract the SAP HANA client installation archive
- D. Move the R3trans update archive into the download folder
- E. Move the stack.xml update file into the download folder
Answer: A,C,E
NEW QUESTION 42
......
SAP S/4HANA Conversion and SAP System Upgrade Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books | Weighting |
|---|---|---|
| SUM Prepare Part | Perform the SUM prepare part ADM328 | > 12% |
| Downtime | Describe the factors influencing downtime and techniques to reduce downtime ADM328 | 8% - 12% |
| Modification Adjustment | Perform the modification adjustment with SPDD and SPAU ADM328 | 8% - 12% |
| SUM Execution Part | Perform the SUM execution part, including DMO ADM328 | > 12% |
| Handling of an SAP System Landscape | Describe the handling of the SAP system landscape during SAP S/4HANA conversion and SAP system upgrade ADM328 | 8% - 12% |
| SAP S/4HANA Conversion Prepare Phase | Describe and perform the actions necessary during the SAP S/4HANA conversion prepare phase ADM328 | > 12% |
Use Valid Exam E-S4HCON2022 by 2Pass4sure Books For Free Website: https://endexam.2pass4sure.com/SAP-Certified-Technology-Specialist/E-S4HCON2022-actual-exam-braindumps.html